en
English
中文简体
Español
русский
Français
عربى
Deutsch
Português
日本語
한국어
italiano
Shengya
Shengya
Shengya
Shengya
Shengya
Shengya
Shengya
Shengya
Shengya
Specification
| Parameter | Typical Specification |
|---|---|
| Working principle | Rotating magnetic field drives stainless steel pins through the part surface |
| Pin material | SUS304 or SUS316 stainless steel |
| Pin diameter | 0.2 mm to 1.5 mm, selected by burr size and part geometry |
| Tank capacity | 2 L to 20 L depending on model |
| Rotation speed | Approx. 500 to 2800 rpm, stepless adjustment |
| Motor power | 0.4 kW to 1.5 kW depending on model |
| Power supply | 110 V / 220 V / 380 V, 50 / 60 Hz, customizable to destination market |
| Process time | Typically 10 to 60 minutes per batch |
| Process medium | Clean water with a deburring or polishing liquid |
| Control | Digital timer and speed control; forward / reverse rotation on selected models |
| Tank material | SUS304 stainless steel, wear-resistant lining |
| Duty rating | Continuous operation, multiple shifts |
| Optional accessories | Auto liquid dosing, water filter, pin separator, drain valve, extra tanks |
| Noise level | Below 70 dB in normal operation |
| Machine weight | Approx. 25 kg to 120 kg depending on model |
Specifications are typical values. Models, tank size, voltage and options can be customized. Please contact us with your part details for a suggested configuration.
Application
Industrial users choose this machine to replace slow manual deburring and to give every batch the same finish.
- Contract finishing shops: run many part numbers on one machine with quick pin and time changes.
- Metal stamping and fine blanking plants: clean burrs on small stampings in bulk.
- CNC machining cells: finish turned and milled parts straight after machining.
- Fastener and hardware makers: polish threads and remove edge burrs.
- Electronics component makers: deburr connector pins, shells and shields.
- Tool and mold shops: clean small inserts and precision tooling parts.
For production lines, we can advise on tank count, load size and operator workflow so the machine fits your takt time.
Advantages
- Stable and durable: sealed drive and corrosion-resistant tank for long service life.
- Easy to operate: set speed and time, load parts, press start.
- Scalable capacity: start with one machine and add units as volume grows.
- Low consumables: pins last for many cycles and liquid use is small.
- Quick changeover: different parts need only a pin size and time adjustment.
- Safe working environment: wet process with no airborne dust and low noise.
Comparison with Other Deburring Methods
| Factor | Magnetic Pin Deburring | Vibratory or Barrel Finishing | Manual Deburring |
|---|---|---|---|
| Access to small holes and slots | Excellent, fine pins enter micro features | Limited, media is often too large | Depends on operator and tools |
| Typical cycle time | 10 to 60 minutes per batch | Several hours per batch | Minutes per part, labour heavy |
| Consistency between batches | High, controlled by time and speed | Medium | Varies by operator |
| Risk of part-to-part damage | Low, parts are held in the pin bed | Higher, parts can collide | Scratches and over-removal possible |
| Labour requirement | Low, load and unload only | Low | High |
| Suitability for factory use | Continuous duty, simple maintenance | Large footprint and noise | Not scalable |
Buyers usually compare cycle time, access to small features, running cost and consistency. Send us a sample and we can show how the process performs on your own parts.
